You are here: Applications >> Core Selection Matrix
 
Applications Power Ferrite High µ Ferrite MPP Cores  High Flux Cores Kool Mu® Cores Kool Mu® E Cores Strip Wound Cores
Common Mode Filter Inductors   FC-S2
FC-S5		         Contact Applicarion Engineering
Current Transformers   Contact Applicarion Engineering         SWP
Differential Filter Inductors SR-1A   SR-1A SR-1A SR-1A KMC-E1  
Electronic Ballasts Contact Applicarion Engineering         Contact Applicarion Engineering  
Flyback Transformers CG-03   CG-03   CG-03    
Gate Drive Transformers   Contact Applicarion Engineering         Contact Applicarion Engineering
Ground Fault Interrupters   Contact Applicarion Engineering         RC-1
Hall Effect Devices HED-01   HED-01   HED-01    
High Frequency Power Transformers FC-S1
FCC*
FC-L		            
High Q Inductors     Contact Applicarion Engineering        
High Temperature Magnetics CG-06   CG-06 CG-06 CG-06   CG-06
Low Frequency Power Transformers             SWP
Low Height Power Inductors MPP-T1   MPP-T1        
Magnetic Amplifiers             SR-4
Magnetometers or Fluxgates             Contact Applicarion Engineering
Planar Transformers FC-S8            
Power Inductors FCC*   PCC* PCC* PCC*
KMC-LS		 KMC-E1 Contact Applicarion Engineering
Pulse Compression             TWC-S7
Saturable Transformers             TWC-S2
SWP
Step Gap Inductors FC-S4            
Thyristor or SCR Protection             SWP
Tunable Inductors FCC*            

* These documents are the applicable pages from a Design Manual/Catalog.  For the entire document, please visit the MAGNETICS® Digital Library.

MAGNETICS® Application Engineers have support materials for this application, but not in the form of an Application Note.  Please visit our Contacts page to contact the appropriate Application Engineer for further information.  A formal Application Note may be finalized at some future date.

If your application is not listed above, please visit our Contacts page to contact an Application Engineer for design help.

Return to Top